Intercooler & Coldside Hose, Ford Ranger PX1, PX2 & Mazda BT50 2011- 6/2018 2.2L Engine

$1,390.00

Introducing the ultimate Bolt-On power upgrade Intercooler Kit to suit the 2012 onwards Ford Ranger PX/PX2 3.2L Turbo Diesel.
MASSIVE High Flow 680 x 265 x 76mm PREMIUM QUALITY tube and fin lightweight intercooler
Plazmaman’s Tube and Fin Intercooler is by far the most rigid, well-constructed and efficient unit on the open market. Our replacement upgrade intercooler has more than double the flow, and some 3 times more surface area of the OEM unit.
Our testing has shown a 7-9 deg rise above ambient temperature (28 degree day) rise only across the whole rpm range. On road tow testing resulted in 12 -13 approx degree above ambient range with a 2.5 tonne boat towed behind. This is a massive improvement considering the OEM ranger Intercooler was showing temperatures well above 60 deg.
SUPPLIED:
• 680x265x76mm Intercooler
• Reinforced Oil resistant Cold Side hose
• Reinforced Oil resistant Hot Side hose (this shortens the OEM piping by 40%)
• Hose clamps
The Plazmaman premium intercooler unit utilizes all of the OEM mounts and brackets/bolts, with only some small trimming of the plastic trim air ducts required to allow for the thicker core design. This intercooler unit will also fit with all winches on the open market.
The Intercooler is available in raw or stealth black finish

SKU: RANIC Category:

Suitable Vehicles

Please note that the information listed for this part may be out of date or incorrect at the time of listing on the website. Our helpful staff will assist you if they believe there may be an issue with your order.

Make Model Engine / Series Year
Make Model Engine / Series Year
Ford Ranger
Mazda BT50 2.2L 2011 - 6/2016